Expert Answers about Fleetwood Bounder Motorhome

• Part Needed To Activate Tow Dolly Brakes With a 2020 Fleetwood Bounder
• From what I could find out, it looks like your 2020 Fleetwood Bounder was pre-wired for a brake controller. With that being said, you should not need to run anything to get the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR powering the brakes on a tow dolly. However, you will need the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED87FR that will plug into a port under the dash and the Adapter 4-Pole to 7-Pole and 4-Pole # 37185 if you do not already...
  view full answer...


• Recommended Steering Stabilizer For A 2013 Fleetwood Bounder Motorhome
• The RM-RSSP30 you referenced is just the steering stabilizer with no mounting brackets and has been replaced by the # RM-RSSA. The 2013 Fleetwood Bounder Motorhome has a Ford chassis so if you have a 22,000 GVWR then you'll want the # RM-RBK22-RSSA. The sturdy steel spring on this stabilizer help keep your 2013 Fleetwood Bounder Motorhome in line by constantly working to maintain its position. You'll need to mount it between the steering mechanism and the chassis for a tight connection...
  view full answer...


• Recommended RV Water Heater Replacement For A 2002 Fleetwood Bounder Motorhome
• There isn't a "direct" replacement for the Atwood GC10A-3E RV water heater but we do still have an option for you with the Furrion RV Tankless Water Heater # FR98SR. Motorhome's typically have a special door for their water heater that matches the color of the motorhome, which usually can't be used with another model water heater because of how they mount. If the door has its own mounting flange then you might be able to get away with pulling it off and reinstalling it with the # FR93FR,...
  view full answer...


• Addressing Handling and Stability Issues on a 2014 Fleetwood Bounder 35K
• If you didn't get an alignment when you got your new tires I would start there. The wondering issues could very easily be fixed by having the front end on your 2014 Fleetwood Bounder 35K aligned. If you have had an alignment done I would check to make sure your steering stabilizer is properly installed and functioning correctly. Another issue could be improper air pressure. If you are mainly concerned about your front end and steering I would start with the SumoSprings Rebel Custom Helper...
  view full answer...


• SumoSprings Fit on 2003 Fleetwood Pace Arrow 37A on Ford F-53 Chassis
• You absolutely have the right SumoSprings for your 2003 Fleetwood Pace Arrow 37A on a Ford F-53 chassis. The part number you mentioned is for the front springs, but I do recommend adding the rear springs as well, or starting with the rear and then adding the front if needed. The correct fit for your motorhome for both the front and rear is the following: - Rear: SumoSprings Maxim Custom Helper Springs # SSR-187-54-1 - Front: SumoSprings Rebel Custom Helper Springs # SSF-172-40-2 The...
  view full answer...


• Recommended Bike Rack For Wooken E-Bikes On A 2015 Fleetwood Bounder Motorhome
• With your Wooken E-bikes weighing in at 71lbs the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes # HLY84FR would be a great option. This rack has an 80lb per bike capacity and is rated for motorhome use. The wheel hoops are designed to be able to handle the fat tires of your bikes without needing to purchase an adapter. To prevent theft the ratcheting hooks that hold the frame of your bike also have built in locks and a keyed alike hitch pin lock is included as well.
  view full answer...


• Air Bags For 2004 Fleetwood Bounder 32W on Workhorse Chassis
• We do indeed have both front and rear air bags for your 2004 Fleetwood Bounder 32W on a workhorse chassis, with the correct fits being the following part numbers: - Rear: Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88202 - Front: Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88101 These do both have internal jounce bumpers inside the air springs and are going to provide your motorhome with a more level...
  view full answer...


• Will The Flexible Valterra Wand # A01-0187VP Work In A Vacuum Flush System
• The Valterra Flexible Tank Wand for RV Black-Water Tank # A01-0187VP was designed to just drop right into the black tank so you will most likely not be able to use it to get through your vacuum style system. Trying to run it through the toilet and then through the vacuum would be quite challenging. The only way it would work is if you had another access hole to the tank or if you ran it up through the dump tube opening of the tank. This way would be quite messy but would give you more of...
  view full answer...


• Determining The Correct SnapPads For A 2007 Fleetwood Bounder Motorhome
• To determine if the Replacement Pad for SnapPad Jack Stand Pad System # SN37FR will work for your motorhome's leveling system you'll need to measure the diameter of the foot pad and take note of its shape. The # SN37FR can fit 8" diameter square foot pads. I recommend measuring each foot pad as some manufacturers will use different sizes and shapes from front to back. If your diameter or shape differs then let me know and I'd be happy to find a compatible fit for you.
  view full answer...


• Replacement Motor for Create-A-Breeze Model 8000 Trailer Roof Vent
• The correct motor for your Create-A-Breeze model 8000 is the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00. I have added a link to a video review for you to check out as well.
  view full answer...


• Will Curt Trailer Hitch Fit a 2016 Fleetwood Bounder 36H Motorhome
• I definitely understand where you're coming from, but I can assure you that we list the Curt Trailer Hitch Receiver # C14082 as a fit for your 2016 Fleetwood Bounder 36H because we've done our research and have confirmed it to fit the F-53 chassis on your motorhome. Sometimes hitches will fit multiple applications and this is one of those cases - so you can be confident you're getting a trailer hitch that fits your motorhome!
  view full answer...


• Does Timbren Suspension Enhancement Fit 2018 Fleetwood Bounder 35P Motorhome
• They do, yes; I verified with the manufacturer that the Timbren suspension enhancement does indeed fit your 2018 Fleetwood Bounder 35P motorhome. The correct part numbers for both the front and rear Timbrens are the following: - Rear: Timbren Rear Suspension Enhancement System # TFRF53A - Front: Timbren Front Suspension Enhancement System # TFFF53B These will do a really nice job of giving you a more controlled, stable driving experience in your Fleetwood, engaging as needed, and compressing...
  view full answer...


• Correct Steering Stabilizer for 2016 Fleetwood Bounder K35 Motorhome
• The correct Roadmaster Exact Center Steering Stabilizer (Replaces the Roadmaster Reflex Steering Stabilizer) for a 2016 Fleetwood Bounder K35 on Ford F-53 Chassis is part # RM33RR. This stabilizer offers a bolt-on fit and will do an excellent job of helping the steering wheel stay centered while out on the road.
  view full answer...


• Anti-Sway Bar & Steering Stabilizer For 2022 Fleetwood Bounder 33C on Ford F53 Chassis
• You're on the money with what you need to improve the handling of your 2022 Fleetwood Bounder 33C motorhome. Big rigs like yours (which is on a Ford F53 chassis) can be very taxing due to how hard you have to work to keep it in line, so the best thing you can do is add anti-sway bars and a steering stabilizer. I'll go ahead and list out the fits for your '22 Bounder 33C, which I verified with Roadmaster for you: - Roadmaster Rear Anti-Sway Bar # RM25VR - Roadmaster Front Anti-Sway Bar...
  view full answer...


• Replacement Air Conditioner for a 2007 Fleetwood Bounder 34F Workhorse
• I have a solution for you but you can't replace the compressor on a motorhome AC like you would in your home or car. They don't make them with ports to drain and refill the Freon so no one will be able to service them. You will need to replace the AC unit on your 2007 Fleetwood Bounder 34F Workhorse with the Advent Air Replacement RV Air Conditioner for Coleman Setup w/ Start Capacitor item # ACCOL150B. This is a 15,000 Btu unit with a built in start capacitor. The included adapter wiring...
  view full answer...


• Recommended Flat Towing Components For A 2012 Jeep Wrangler
• To tow a 2012 Jeep Wrangler behind your 2019 Fleetwood Bounder you'll need the following components: Baseplate: Blue Ox Base Plate Kit # BX1126. This baseplate is designed for a factory bumper, if you have a specialty or aftermarket then I'll need to know what it is to find the correct fitting baseplate. Tow Bar: Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380. This tow bar comes with safety cables included so you won't need to purchase them separately. Tow Bar Wiring: I see you were...
  view full answer...


• Anti-Sway Bars, SumoSprings, & Steering Stabilizer Fit on 2016 Fleetwood Bounder 35K
• We have exactly what you need for your 2016 Fleetwood Bounder 35K - the front anti-sway bar, rear anti-sway bar, rear SumoSprings and front SumoSprings. I'll list exactly what you need for your motorhome: - SumoSprings Maxim Custom Helper Springs - Rear Axle # SSR-187-54-1 - SumoSprings Rebel Custom Helper Springs - Front Axle # SSF-170-40-2 - Roadmaster Exact Center Steering Stabilizer # RM42RR - Roadmaster Front Anti-Sway Bar # RM-1139-148 - Roadmaster Rear Anti-Sway Bar # RM-1139-149 In...
  view full answer...


• How To Confirm Fit of the MaxxAir Replacement RV Air Conditioner Cover for Coleman-Mach
• The MaxxAir Replacement RV Air Conditioner Cover part # MA8335A5261 will fit all Coleman Mach RV Air Conditioners. If this is what you have then it will work great. There should have been some documentation that came with the coach that had the air conditioner specs but if you no long have these you'll have to get on the roof and look at the actual unit for the make and model. If there is none, read me some of the serial numbers and I'll see if we can cross reference anything. That said,...
  view full answer...


• Recommended Replacement For A Connex AVS500BT RV Stereo System
• I do have a replacement option for your Connex AVS500BT that will have all the features you're looking for with the Jensen RV Stereo w DVD Player # JWM70A, but it would require you to make slight alterations to your cutout hole to fit. This stereo require a 7-1/2" wide x 2-3/4" tall x 6-1/4" deep cutout hole so you'd have to trim your current hole a bit larger to fit. This stereo has 3 output zones, DVD, AM/FM, CD, MP3, and Bluetooth capabilities. It can be controlled using the jControl...
  view full answer...


• SumoSpring Fit for Front Suspension of 2008 Fleetwood Bounder 35H Motorhome
• The Sumo Springs front helper springs you need for your 2008 35H Fleetwood Bounder Motorhome will depend on which chassis it's built on. If it's on the Ford chassis, you'd use # SSF-171-40-2. If it's on the Workhorse chassis, use # SSF-280-47. I've linked to some product videos that you might find helpful.
  view full answer...